Summer days are high, which means you want to keep windows open during the day and night time to let the cool summer breeze wash in. You may feel your home is cooler despite the summer heat but wind gusts may pass through or around the door and window frames rather easily.

If you notice this happening anytime sooner, your home windows need improvement. You need to take the following steps to ensure solid window insulation that will save up energy and even keep your house warm during winter.

5 Quick Ways to Fix Draft Windows

Usually, new homeowners are more educated when it comes to saving energy. Drafts are caused because of the heat transfer via glass or even framing. Once the thermal resistance is improved, a window’s overall efficiency becomes better. Here are the tips homeowners can follow easily.

Insulation Protection 

The larger the window size is the more they will benefit from added protection layer. For instance, new homeowners of a house in the smart city in Lahore, will not have to worry about vinyl window insulator kits. The new home structure is eco-friendly and is installed during the time window frames are added. But if you have an old home, or renting a property you will require to install window insulation kits.

But the good news is that these kits are affordable and easily available in the market. That’s why new houses under construction are readily practicing the installation of window insulation film as they can be applied to larger frame sizes.

Self-Stick Vinyl 

These are tension seals, folded strips of foam-like insulation. They are v-shaped, hence also called V-channel weather stripping. The narrowest of cracks in the window and door frames are easily covered with this type of vinyl. Another benefit is that self-stick vinyl is moister resistant.

Start by using a moist cloth to wipe the inside of the window jamb all the way around before installing V-channel weather stripping. Dry off. Four V-channel strips were cut, each one inch longer than the lower sash’s height. the lower sash raised. With the backing on the top inch, apply a strip within the jamb. Put that extra inch under the sash’s side. For the other side, repeat. Remove the excess backing, press the strips into position, and then close the window. The extra inch of V-channel should be fed down when doing the same for the upper sash.

Bubble Wrap Sheets 

By covering your windows with sheets of bubble wrap, you can reduce the U-factor of your windows in a manner similar to that of vinyl insulating film. The plastic layers serve as an additional layer of glass and absorb thermal radiation. Although the line of sight out a window is blocked by its bubble design, it nonetheless lets natural light enter a house during the winter. Additionally, bubble wrap may be recycled repeatedly, in contrast to insulation film.

Window-Glazing Compound 

As part of routine maintenance, single-pane windows that are older need to have their glazing replaced. Take steps to make repairs if you have single-pane windows in your home and discover that there are drafts between the glass and the trim or that the glass panes shake loosely when you tap on them.

If you discover that repairs are required in the middle of winter, be understanding, install a temporary plastic window seal, and put glazing on your spring to-do list. At temperatures above freezing, it is easiest to apply the glazing compound, and frequently, it is also simpler to remove the glass for maintenance. This is a DIY task that you can learn to accomplish on your own if you have a little patience.

Weather-Sealing Foam Tape 

When you need to seal gaps in a closed window, rolls of weather-sealing foam come in helpful. You may purchase the compressible, high-density foam in a range of thicknesses to fit medium and large gaps between 7/16-inch and 1/8-inch. The foam has an adhesive backing that makes it simple to apply and ensures that it stays put.

The foam tape can often be maintained in place all year to add additional insulation during the summer in many applications. Although it can eventually start to deteriorate, this inexpensive substance can help seal a window for many years.